Home › Blog › How do I add staff at my law firm to Claude Team?

How do I add staff at my law firm to Claude Team?

Team Setup

Short answer

A law firm adds its attorneys and staff to Claude Team from Organization settings > Members > Add member, using the By email tab so every name is one the partners approved. Before the first invite goes out, set new member approval to require an admin, keep associates, paralegals and assistants on the User role, and give each person their own seat. The one gotcha for a firm: a seat belongs to one named person, so two paralegals cannot share a login, and every pending invite holds a paid seat for up to 21 days. Send the approved roster, not a wish list, and check the Pending tab the same week.

Why this matters: Our engagement letter says we don't use self-learning AI. Does Claude Team keep that promise?. This post is the how.

Before you start

  • Role needed: Owner, Primary Owner or Admin. Only an Owner or the Primary Owner can make someone an Admin or Owner, or buy seats.
  • Have ready: a roster the managing partner signed off on, with each person’s work email and the role they get. Every address must be on one of the firm’s allowed domains.
  • Decide who holds Primary Owner: there is only one per organization, it uses one of your seats, and only that person can request a data export or transfer ownership.
  • How long: about ten minutes for a firm of a dozen people, including the approval setting and the Pending check.
  • What it changes on the bill: new seats are prorated and charged immediately, and each pending invite counts against your seat limit until it is accepted, cancelled or expires.

Do this

  1. Open Organization settings, then Organization and access. Under User provisioning, set New member approval to Require admin approval.

    You’ll see: two choices, Approve automatically and Require admin approval. The setting also covers invitations that existing members send, so an associate cannot quietly add a contract attorney.

  2. In the People section, click Members, then click Add member in the top right.
    Claude Team admin settings, The Add member dialog on first open, with the By email tab selected and the one-time Invite by email tip
    Step 2: The Add member dialog on first open, with the By email tab selected and the one-time Invite by email tip

    You’ll see: the Add member dialog with a note that billing for new members is prorated from the date they are added, the By email and By invite link tabs, and a one-time tip you can dismiss with Got it.

  3. Stay on By email and paste the approved addresses into the Email box, separated by commas or new lines. For the whole firm at once, click Upload CSV.
    Claude Team admin, Add member dialog: By email tab, paste emails or Upload CSV, Role and Tier selectors: Paste the approved list here
    Step 3: The Email box on the By email tab, where the partner-approved list of work emails goes

    You’ll see: the Email box, the Upload CSV link above it on the right, and the Role and Tier selectors underneath.

  4. Open the Role dropdown and choose User for associates, paralegals and legal assistants.
    Claude Team admin, Add member: Role dropdown (User, Admin, Owner) with permissions summary: User for associates and staff
    Step 4: The Role dropdown with User, Admin and Owner and a one-line summary of each

    You’ll see: User (can create chats), Admin (can manage user membership) and Owner (can manage user roles and organization settings).

  5. Open the Tier dropdown and choose Standard seat unless the partners already decided a specific person needs a Premium seat.
    Claude Team admin settings, The Tier dropdown with the Standard seat and Premium seat choices
    Step 5: The Tier dropdown with the Standard seat and Premium seat choices

    You’ll see: Standard seat and Premium seat. Premium only appears once the firm owns at least one Premium seat.

  6. Click Add member at the bottom of the dialog.

    You’ll see: the dialog closes and the Members page returns. New names are not on the Active list until each person accepts.

  7. Send the firm administrator as a separate batch with the Admin role, so the people who only need User never get it by accident.

    You’ll see: the same dialog, with Admin selected for that one address.

  8. Click the Pending tab and confirm every name on the roster is listed. Cancel any wrong or stale address so it stops holding a seat.

    You’ll see: one row per invitation, with the role and seat you chose and the option to cancel it.

What happens next

Who gets which role at a law firm

Claude Team roles mapped to typical small law firm positions, from Anthropic's roles and permissions article, checked 2026-10-30.
Firm position Claude Team role Why
Managing partner Primary Owner Billing, seats, roles, data export and ownership transfer. One per organization
A second partner Owner A backup who can pay invoices, buy seats and change roles
Firm administrator or office manager Admin Invites and removes members and cancels invitations; cannot see billing or usage analytics
Associates, paralegals, legal assistants User Create chats and use projects; nothing in the admin settings

Michael’s two cents

Anthropic’s page says each seat belongs to one named person, credentials are not shared, and reassigning a seat is not meant for rotating it among several active people. In a small firm that means the habit of two paralegals working off one login does not carry over to Claude. Each of them gets a seat, or one of them does not use it. I also set new member approval to require an admin before the first invite, because member invites are on by default for new organizations. Then I invite from the roster the managing partner signed, keep the firm administrator as the only Admin, and leave billing and roles with the partners. When the malpractice carrier or a client asks who has access, the Members page answers it in one screen.

Michael Robichaud, Strategized.ai

Watch out for

  • The By invite link tab adds people automatically, even with Require admin approval turned on. A firm that wants to see every name first should invite by email only.
  • Everyone in one send gets the same Role and Tier. Send the Admin, and anyone on a Premium seat, as their own batch.
  • If Add member will not add anyone while seats look open, pending invites are holding them. Cancel stale invites on the Pending tab or have an Owner buy seats.
  • An Admin cannot invite another Admin or Owner, and cannot change anyone’s role. That stays with an Owner or the Primary Owner.
  • Removing someone who leaves the firm frees the seat right away but does not reduce the total seat count or lower the bill mid cycle.

If something goes wrong

  • Symptom: the dialog rejects a contract attorney’s personal address. Fix: the domain is not on the firm’s allowed list. An Owner adds it under Organization and access, then you send the invite again.
  • Symptom: a paralegal says the invite never arrived. Fix: check the Pending tab. If the name is there, have them check spam; if 21 days have passed, send it again.
  • Symptom: a partner needs a Premium seat but the Tier dropdown only shows Standard. Fix: the firm owns no Premium seat yet. An Owner buys one under Organization and access, then you assign it.
  • Symptom: someone joined that nobody approved. Fix: they likely used an invite link. Remove them from Members, then disable or regenerate the link under Organization and access, which invalidates the old one immediately.

Who at a law firm should hold the Primary Owner seat on Claude Team?

Usually the managing partner, because only the Primary Owner can request a data export or transfer ownership, and there is only one per organization. Anthropic also allows the Primary Owner to be a service account that is not tied to one person, which some firms prefer for continuity.

Can two paralegals share one Claude Team seat?

No. Each seat is for one named person, credentials are not shared, and unused usage cannot move from one seat to another. Reassigning a seat is meant for when someone leaves, not for rotating it during the week.

Do I need to tell my malpractice carrier before inviting staff?

Anthropic’s support pages do not address insurers, so that is a question for your carrier and your own policy. Our guide on what a Team-plan firm can show its malpractice carrier covers what the admin settings let you document.

Can an associate invite people to the firm's Claude Team?

Member invites are enabled by default for new Team organizations. With New member approval set to Require admin approval, those invitations wait for an admin before anyone is added.

More Claude Team Setup how-tos

Rolling Claude out to a team?

Start with Claude Implementation. I set the Team plan up, configure it for every role, train the team on their own work and hand it over.

Talk to a Claude consultant or book a 20-minute intro call

Sources

Anthropic changes these menus. Each source shows the date we checked it.
Strategized.ai is independent and not affiliated with or endorsed by Anthropic. Claude is a trademark of Anthropic, PBC.
Michael Robichaud

Written by

Michael Robichaud

Founder of Strategized.ai, a Claude consultancy for owner-led businesses. Michael leads every Claude rollout himself, designs the custom Claude plugins his team builds, and runs his own five-site publishing network on Claude.

“I set Claude up for owner-led businesses, and I run their marketing on Claude too.”

 ·  Connect on LinkedIn →

About the Author

Michael Robichaud

Founder of Strategized.ai. 30 years across enterprise sales, digital marketing, and building businesses. Practitioner-first AI strategy consulting: done-for-you workspace builds, GEO/AEO, and fractional advisory.

The Strategy Stack

Strategized.ai is the strategy layer. Where to go next.

Keep Exploring

More from the blog

Strategy, GEO/AEO, consulting perspectives.

Browse the Blog →

Prefer to learn it yourself?

Free written guides, from first day to confident.

Read the free guides →

Claude plugins by profession

Ready-made Claude plugins for your role, $99 each. Or start free with the Foundation plugin.

Browse the Claude plugins →